Welcome to JIE NENG DRYER!

Focus on R&D,production
and sales of drying equipment

The troubleshooting method after the accident of rotary dryer.

1.The big gear and small gear meshing clearance is destroyed, the reason is that a. b. tug wear gear wheel wear c. small gear wear its elimination method is according to the wear condition for turning or replacement, also can be opposite to install or update in pairs.

2. The reason is that a. The connection between the tug device and the base is damaged, and the elimination method is to correct the fastening connection part so that it is in the correct position; B. Wear on the side of the rollers. The elimination method is based on the degree of wear, turning or replacing the rolling ring.

3. After drying, the moisture content of the material is greater than the specified number. The elimination method is to control the production capacity of the dryer, and increase or decrease the supply of heat.

4. A hoop of swinging cylinder operation, its reason is the concave roller ring joint profile no clamping, eliminating method is to use plate to keep roller ring and concave joints evenly and clamping, appropriate to prevent too tight and prone to accidents.

Recommended reading

Contact us

+86 028-27926369

+86 15229282506


Jia Jia Industrial Park, Chengdu, Sichuan Province,China

Follow Us On